Minergie-P-ECO

green-building-newsheader image

A U.S.-Made Door for Passivhaus Buildings

An Oregon builder, Hammer & Hand, is producing high-R doors designed for Passivhaus projects

Posted on Oct 19 2012 by Richard Defendorf

Builder Hammer & Hand, based in Portland, Oregon, has developed a design and production strategy for exterior doors that conform to the PassivhausA residential building construction standard requiring very low levels of air leakage, very high levels of insulation, and windows with a very low U-factor. Developed in the early 1990s by Bo Adamson and Wolfgang Feist, the standard is now promoted by the Passivhaus Institut in Darmstadt, Germany. To meet the standard, a home must have an infiltration rate no greater than 0.60 AC/H @ 50 pascals, a maximum annual heating energy use of 15 kWh per square meter (4,755 Btu per square foot), a maximum annual cooling energy use of 15 kWh per square meter (1.39 kWh per square foot), and maximum source energy use for all purposes of 120 kWh per square meter (11.1 kWh per square foot). The standard recommends, but does not require, a maximum design heating load of 10 W per square meter and windows with a maximum U-factor of 0.14. The Passivhaus standard was developed for buildings in central and northern Europe; efforts are underway to clarify the best techniques to achieve the standard for buildings in hot climates. performance standard.


Tags: , , , , , , , ,

Image Credits:

  1. All photos - Hammer & Hand

Register for a free account and join the conversation


Get a free account and join the conversation!
Become a GBA PRO!

Syndicate content