Roger Normand

musingsheader image

Passivhaus Practitioners Share Their Success Stories

The Fall Symposium sponsored by Passive House New England included presentations from designers, builders, and homeowners

Posted on Nov 9 2012 by Martin Holladay

A group of about 130 designers, builders, and Passivhaus fans gathered at U Mass Boston on October 27, 2012 to attend a one-day conference organized by Passive HouseA residential building construction standard requiring very low levels of air leakage, very high levels of insulation, and windows with a very low U-factor. Developed in the early 1990s by Bo Adamson and Wolfgang Feist, the standard is now promoted by the Passivhaus Institut in Darmstadt, Germany. To meet the standard, a home must have an infiltration rate no greater than 0.60 AC/H @ 50 pascals, a maximum annual heating energy use of 15 kWh per square meter (4,755 Btu per square foot), a maximum annual cooling energy use of 15 kWh per square meter (1.39 kWh per square foot), and maximum source energy use for all purposes of 120 kWh per square meter (11.1 kWh per square foot). The standard recommends, but does not require, a maximum design heating load of 10 W per square meter and windows with a maximum U-factor of 0.14. The Passivhaus standard was developed for buildings in central and northern Europe; efforts are underway to clarify the best techniques to achieve the standard for buildings in hot climates. New England.

It's impossible for this report to be comprehensive, unfortunately, and I won't be able to do justice to all of the conference events. My report will focus on three speakers: Adam Cohen, Chris Corson, and Roger Normand.

Tags: , , , , , , , , ,

Image Credits:

  1. Image #1, #4 and #8: Martin Holladay
  2. Image #2 and #3: Adam Cohen
  3. Image #5, #6, and #7: Chris Corson
  4. Image #9: Roger Normand

guest-blogsheader image

Looking Through Windows — Part 1

Selecting the right windows means juggling performance specifications, warranties, availability, and price

Posted on Aug 21 2012 by Roger Normand

[Editor's note: Roger and Lynn Normand are building a Passivhaus in Maine. This is the fifth article in a series that will follow their project from planning through construction.]

When we first began looking at windows for our Passivhaus project, we started with a list of 15 window manufacturers. We whittled the list down to two: Schüco, which on paper looked like the best European-style window, and Pella, the best North American style window.

Tags: , , , , , , , ,

Image Credits:

  1. Schüco International KG
  2. Chris Briley

Register for a free account and join the conversation

Get a free account and join the conversation!
Become a GBA PRO!

Syndicate content