GBA Logo horizontal Facebook LinkedIn Email Pinterest Twitter X Instagram YouTube Icon Navigation Search Icon Main Search Icon Video Play Icon Plus Icon Minus Icon Picture icon Hamburger Icon Close Icon Sorted

Community and Q&A

What type of polyiso insulation to use over sheathing?

SquakMtn | Posted in Energy Efficiency and Durability on

I would like to know what type of polyiso rigid board to use over the exterior of sheathing, assuming a rainshield will be placed over that? Does foil covered improve with radiant heat or does it trap moisture and create mold problems on the sheathing interface as some blog responses claim? Hunter makes H-shield which has fiber reinforced surfaces, but no foil. Would there be deterioration concerns?

Thanks,
Steve

GBA Prime

Join the leading community of building science experts

Become a GBA Prime member and get instant access to the latest developments in green building, research, and reports from the field.

Replies

  1. GBA Editor
    Martin Holladay | | #1

    Steve,
    Any type of polyiso will work fine. If you can install two layers of polyiso with staggered seams, you'll get a more airtight installation with less thermal bridging.

    If you install foil-faced polyiso and the foil faces an air space, the foil will raise the R-value of the air space from R-1 to R-2 -- a slight thermal improvement.

  2. user-1037041 | | #2

    Martin --

    Would the "airspace" you refer to above be the gap formed by the proposed rainscreen in Steve's original post?

  3. GBA Editor
    Martin Holladay | | #3

    Jeff,
    Q. "Would the 'airspace' you refer to above be the gap formed by the proposed rainscreen in Steve's original post?"

    A. Yes.

Log in or create an account to post an answer.

Community

Recent Questions and Replies

  • |
  • |
  • |
  • |