GBA Logo horizontal Facebook LinkedIn Email Pinterest Twitter X Instagram YouTube Icon Navigation Search Icon Main Search Icon Video Play Icon Plus Icon Minus Icon Picture icon Hamburger Icon Close Icon Sorted

Community and Q&A

I have three energy reduction measures.

L3JckwGJx8 | Posted in Energy Efficiency and Durability on

Electricity is the only energy power.
One measure saves 25% . The second saves 7.5% and the last one saves 10%. What is the total saving?

GBA Prime

Join the leading community of building science experts

Become a GBA Prime member and get instant access to the latest developments in green building, research, and reports from the field.

Replies

  1. jklingel | | #1

    First off, are you sure these savings are cumulative, and therefore independent, and even real? If so, then take off the 25%, then take off 7.5% of the 75% balance, and finally 10% of that balance. However, I suspect that these savings, if even real, are not independent and cumulative. After all, if you installed enough of these types of things, pretty soon you'd have a (nearly) 100% savings.

  2. GBA Editor
    Martin Holladay | | #2

    Hanan,
    John gave you the right answer.

    If a house has only a TV (33% of electrical usage), lights (33% of electrical usage), and a refrigerator (33% of electrical usage), what happens when you install a TV that saves 25%, lights that save 7.5%, and a refrigerator that saves 10%?

    Well, if you used to use 1,000 kWh a month (333 kWh for the TV, 333 kWh for the lights, and 333 kWh for the refrigerator), you will now use 250 kWh + 308 kWh + 300 kWh = 858 kWh a month.

    That is a savings of 14.2%.

    But this is just one example. You should think in kWh, not in percentages.

  3. user-943732 | | #3

    Actually, there isn't any right answer here except -- it depends.

    Are the percent savings the percent of specific end uses that add to the total, like Martin assumed.? Or are they each % savings calculated relative to the entire energy use? If it's the latter, then the question becomes whether they interact with each other -- which typically happens if there are HVAC measures but not so much for envelope measures.

    Example, you calculate savings from insulating your walls at 20% of your usage and insulating your attic at 10% of your usage and replacing your windows at 8% of your usage. If you do all 3, then you should save 20% + 10% + 8% = 38% -- the savings from each measure are independent. But if you were savings the 20% from heating system replacement instead, then you would save 20% + .8 * 10% + .8 * 8% = 34.4% because you need to adjust the savings from the shell measures for the change in heating system efficiency.

Log in or create an account to post an answer.

Community

Recent Questions and Replies

  • |
  • |
  • |
  • |