GBA Logo horizontal Facebook LinkedIn Email Pinterest Twitter Instagram YouTube Icon Navigation Search Icon Main Search Icon Video Play Icon Plus Icon Minus Icon Picture icon Hamburger Icon Close Icon Sorted

Community and Q&A

Low-e storm window over low-e house window?

gocdunn | Posted in Energy Efficiency and Durability on

Hello,
I was wondering if anyone knows the answer to this: Is there an advantage putting low e storm windows over low e windows? Low e raises the cost of the storm window and if the house already has permanent low e windows then would clear glass storm windows be the way to go?
Thanks for your time,
Chris.

GBA Prime

Join the leading community of building science experts

Become a GBA Prime member and get instant access to the latest developments in green building, research, and reports from the field.

Replies

  1. Expert Member
    Dana Dorsett | | #1

    Putting storm windows (low-E or not) over sealed glass windows (low-E or not) can sometimes cause the seal to fail on the glazing, and should only be done with careful consideration of just how much direct sun there is. With heat-rejecting low SGHC low-E windows the risk of creating a heat trap and causing the exterior side of the sealed glass to overheat, but most higher SGHC type low E windows can take it. This is with or without a low-E coating on the storm window.

    Building Science Corp has successfully put low-E storms over ~U0.32 low-E windows as part of deep energy retrofits in a Massachusetts climate, bringing the total performance down to U0.25-ish at an SGHC of about 0.5:

    https://buildingscience.com/file/3981/download?token=KzlKzjmp

    On page 3 under Window Specifications:

    "New Harvey Tru Channel storm windows
    over existing wood-framed, doubleglazed,
    low-E windows; approx.
    composite performance: U=0.25,
    SHGC=0.52"

  2. GBA Editor
    Martin Holladay | | #2

    Chris,
    For more information on this issue, see Insulated Storm Windows? I urge you to read the posted comments as well as the article.

    In Comment #31, GBA reader David Jones noted, "Modeling performed for LBNL by sustainability consultant Thomas Culp, Ph.D. has uncovered the potential for serious overheating problems when low-e storms are added to low-e windows: in hot weather, in direct sunlight, temperatures up to 185° F (85° C) may be reached. That kind of heat can cause premature aging or failure of the insulated glazing unit’s seals. Further testing will yield a better understanding of the exact conditions under which this can occur and possible solutions, but it would be wise to avoid using low-e storms in combination with low-e double-pane windows until more is known."

Log in or create an account to post an answer.

Community

Recent Questions and Replies

  • |
  • |
  • |
  • |