GBA Logo horizontal Facebook LinkedIn Email Pinterest Twitter Instagram YouTube Icon Navigation Search Icon Main Search Icon Video Play Icon Plus Icon Minus Icon Picture icon Hamburger Icon Close Icon Sorted

Community and Q&A

What’s the best assembly for an unvented attic roof?

WinnDesign | Posted in General Questions on

We’re about ready to break ground on a new home in Northern Virginia (Climate Zone 4) and we’re planning on having an unvented attic. The assembly I’m considering 5/8″ Zip-System roof sheathing with Henry permiable underlayment, cedar breather and then cedar shakes. My thinking was that the combo of Zip and Henry would be a ‘belt-and-suspenders’ approach to protect against water since I’ll have closed-cell spray foam on the underside. I also wanted vapor permiable membranes and cedar breather to increase the drying potential of the sheathing. Thoughts?

GBA Prime

Join the leading community of building science experts

Become a GBA Prime member and get instant access to the latest developments in green building, research, and reports from the field.

Replies

  1. GBA Editor
    Martin Holladay | | #1

    Michael,
    Sounds OK to me.

  2. WinnDesign | | #2

    Martin,

    Am I creating an issue having two WRBs (the Zip AND Henry)?

    Thanks,
    Michael

  3. GBA Editor
    Martin Holladay | | #3

    Michael,
    The term "WRB" applies to walls, not roofs.

    Building codes require builders to install roofing underlayment under the roofing. As far as I know, some building inspectors may waive the requirement for roofing underlayment when taped Zip sheathing is installed.

    But installing roofing underlayment on top of Zip sheathing won't cause any problems (especially on a roof with Cedar Breather and cedar shingle roofing).

  4. WinnDesign | | #4

    In this particular case, the Henry product is a WRB. They don't have a vapor-permeable roof underlayment, however, my understanding is that some builders have been using their Blueskin VP100 self-adhered WRB as a roof underlayment. The only issue is that it's not made to be walked on and will void ZIP's warranty. Thoughts? Any alternatives I should be considering?

  5. GBA Editor
    Martin Holladay | | #5

    Michael,
    Why does the Henry product void the warranty of the Zip sheathing?

    If you want a vapor-permeable roofing underlayment, choose a vapor-permeable roofing underlayment (rather than a product designed for walls). Options include:

    1. #15 asphalt felt
    2. Perma R Products PermaFelt
    3. GAF Materials Deck-Armor
    4. Cosella-Dörken Delta-Maxx Titan
    5. Cosella-Dörken Vent S
    6. Cosella-Dörken Delta-Foxx
    7. VaproShield SlopeShield
    8. Nemco Industries RoofAquaGuard BREA

    For more information, see Synthetic Roofing Underlayments.

  6. afewquestions | | #6

    Michael,
    Curious about contractors involved in unvented roof assembly. I am considering conversion to unvented as part of energy retrofit. Not sure who is best able to help.

    Scott

Log in or create an account to post an answer.

Community

Recent Questions and Replies

  • |
  • |
  • |
  • |