GBA Logo horizontal Facebook LinkedIn Email Pinterest Twitter X Instagram YouTube Icon Navigation Search Icon Main Search Icon Video Play Icon Plus Icon Minus Icon Picture icon Hamburger Icon Close Icon Sorted

Community and Q&A

12″ structural brick wall – air space? insulation?

GBA Editor | Posted in Green Building Techniques on

I have a client who wants to build a home using 12″ utility brick for structural wall with felt applied directly to the brick on the inside, then 2 x 4 studs and a sill plate added just for interior finish nailer (interior finish will be t & g pine) and blue jean insulation between the studs. This is high humidity eastern coastal area and I’m very concerned about moisture and condensation. I am having trouble convincing him to leave an air space and use the brick as veneer or else we have to leave an air space between the sill plate/stud and the brick wall (meaning we would frame the walls first and apply the sheathing and felt, then brick.
Any ideas for a purist building a structural brick green home?

GBA Prime

Join the leading community of building science experts

Become a GBA Prime member and get instant access to the latest developments in green building, research, and reports from the field.

Replies

  1. GBA Editor
    Martin Holladay | | #1

    Pamela,
    If your client goes this route -- an oddball route for sure -- be very careful to address thermal bridges. You will end up with a house-within-a-house. The inside house needs to be thermally separated from the outside brick house.

    Be sure the house has wide roof overhangs on all sides to keep water off the brick. You won't have any real WRB behind the brick, and no weep holes at the bottom, so be sure everyone involved has lots of liability insurance and errors-and-omissions insurance. You all may end up in court.

  2. Pamela | | #2

    Thanks Martin. I agree with the "house within a house" scenario - waste of materials, too. I may have to pass on this one.

  3. GBA Editor
    Martin Holladay | | #3

    Pamela,
    Some further thoughts:

    1. It would be good to know your climate.

    2. If you are in a hot climate, the idea may not be as oddball as my first response implied. Plenty of Florida builders routinely build structural masonry walls (using CMUs, otherwise known as concrete blocks). Such walls can work well in that climate, especially if they are insulated on the exterior with rigid foam insulation.

  4. Pamela | | #4

    thanks again. This is coastal nc. Though because he wants to use the brick as the finish exterior I won't be able to insulate exterior or apply any kind of exterior moisture barrier ( ie stucco or parging) Thats my concern

Log in or create an account to post an answer.

Community

Recent Questions and Replies

  • |
  • |
  • |
  • |