0 Helpful?

Garage door detail on FPSF

Doing a FPSF w/ an attached garage(heated) in zone 5a. Does anybody have a good detail for an overhead garage door where it contacts the slab? Have a few ideas in mind, but need something that will last. That is one nasty thermal bridge to contend with....

Asked by Todd Kalin
Posted Dec 2, 2012 7:50 PM ET

Tags:

2 Answers

Select your preferred way to display the comments and click "Save settings" to activate your changes.
1.

Ideas to knock around at these two links, and do search here.

http://www.greenbuildingadvisor.com/community/forum/general-questions/22...
and
http://www.greenbuildingadvisor.com/community/forum/energy-efficiency-an...

good luck. if you come up with anything of genius, let us know. i am still undecided on exactly what to do.

Answered by John Klingel
Posted Dec 3, 2012 1:50 AM ET

2.

Todd,
I second John's suggestion. After you read through all the comments on the two threads that John linked to, you can post any further questions here.

Answered by Martin Holladay, GBA Advisor
Posted Dec 3, 2012 6:11 AM ET

Other Questions in Green building techniques

pex a vs pex b

In General questions | Asked by dean sandbo | May 26, 16

Cathedral ceiling rafter cavity and insulation

In Green building techniques | Asked by Scott Smith | May 26, 16

Attic insulation quandary

In GBA Pro help | Asked by Tim Lange | May 16, 16

Foil insulation barriers

In Energy efficiency and durability | Asked by Richard Broad | May 25, 16

Direct vent vs power vent gas water heaters

In Mechanicals | Asked by Erik Addy | Mar 8, 16
Register for a free account and join the conversation


Get a free account and join the conversation!
Become a GBA PRO!