0 Helpful?

Cathedral ceiling roof assembly

The cathedral ceiling roof assembly on a recent addition to my house consists of vented fiberglass-filled bays with with an interior layer of 1/2" foil-faced polyiso under the 2x10 rafters.

Investigating a strong odor on hot days, I found that the builder...

Michael Roland,
Nassau, NY

Asked by Michael Roland
Posted Jul 16, 2014 8:34 AM ET
Edited Jul 16, 2014 9:05 AM ET

Tags:

1 Answer

Select your preferred way to display the comments and click "Save settings" to activate your changes.
1.

Michael,
I'm guessing that you had some trouble filling in the Q&A boxes, and that your question was cut off. If you can figure out how to post a comment here, perhaps you can write your full question again.

Answered by Martin Holladay, GBA Advisor
Posted Jul 16, 2014 9:06 AM ET

Other Questions in Green building techniques

Cost comparision between conditioned and vented crawlspace

In Energy efficiency and durability | Asked by Mark Walker | Sep 4, 15

Water supply line routing

In Mechanicals | Asked by Stan Smith | Sep 3, 15

Concerns about backdrafting and makeup air

In General questions | Asked by Forum User | Sep 3, 15

Is this a risky wall assembly?

In Energy efficiency and durability | Asked by Jeremy Coenen | Sep 3, 15

Is testing the air barrier with scented water vapor as effective as traditional fog test?

In Energy efficiency and durability | Asked by Amanda M | Sep 3, 15
Register for a free account and join the conversation


Get a free account and join the conversation!
Become a GBA PRO!