GBA Logo horizontal Facebook LinkedIn Email Pinterest Twitter X Instagram YouTube Icon Navigation Search Icon Main Search Icon Video Play Icon Plus Icon Minus Icon Picture icon Hamburger Icon Close Icon Sorted

Community and Q&A

Thermal bridging via a steel I-beam in an exterior wall

okapi222 | Posted in Green Building Techniques on

We have a masonry row house building with interior insulation (about R16) in New York city. The exterior of the building consists of 3 wythes of brick (about 12″ thick). We are now building a steel frame deck. 2 steel i-beams will be inserted into the outermost wythe to support the deck. Does this present any kind of thermal bridging?

Note, the i-beam does not penetration the two innermost layers of brick npenetor the interior insulation. It only penetrates 4 ” or one brick width in.

I ask this question because I don’t really understand if the cold steel up against the brick actually presents more of thermal threat than the ambient air temperature.

Thanks.
Daniel

GBA Prime

Join the leading community of building science experts

Become a GBA Prime member and get instant access to the latest developments in green building, research, and reports from the field.

Replies

  1. GBA Editor
    Martin Holladay | | #1

    Daniel,
    I don't think that the steel beam you describe will affect the thermal performance of the wall very much.

    Of course, you need to make sure that an engineer has approved of the plan, and that the beam is adequately supported, and able to transfer the load to a solid footing.

    It's also possible that the beam you describe will cause water entry problems, depending on how it is flashed. But I wouldn't worry too much about the wall's thermal performance.

Log in or create an account to post an answer.

Community

Recent Questions and Replies

  • |
  • |
  • |
  • |