GBA Logo horizontal Facebook LinkedIn Email Pinterest Twitter X Instagram YouTube Icon Navigation Search Icon Main Search Icon Video Play Icon Plus Icon Minus Icon Picture icon Hamburger Icon Close Icon Sorted

Community and Q&A

Thermal expansion of through-fastened steel roofing

ranson | Posted in Green Building Techniques on

What details ensure that a through fastened roof won’t have problems with thermal expansion? I really like the idea of through fastened steel roofing, looking at cost and recyclability. However, I’m concerned that thermal expansion will undermine an otherwise durable material.

–John

GBA Prime

Join the leading community of building science experts

Become a GBA Prime member and get instant access to the latest developments in green building, research, and reports from the field.

Replies

  1. GBA Editor
    Martin Holladay | | #1

    John,
    Manufacturers of through-fastened steel roofing accommodate thermal expansion by including ribs or corrugations in the metal panels. As these panels expand, the metal between the screws expands, and this expansion is accommodated and disguised by the ribs or corrugations.

    Through-fastened metal roofing sometimes makes a squeaking or popping sound when the sun hits the panels. These sounds indicate that the metal is expanding. If the thought of a roof that occasionally makes these noises bothers you, choose a different roofing.

  2. ranson | | #2

    I'm not worried about squeaking and popping. I do see how the corrugations and short width relieve pressure along the narrow axis of the panel. However, along the length of the panel, where it expands most and is braced by the corrugations, I'm concerned about the force on the fasteners. A lot of standing seam panels use clips that allow the panel to slide along its length. How do the fasteners in a through-fastened panel bear this force without pulling out?

    (Thanks for updating the title. I noticed the error after I clicked submit, and couldn't figure out how to change it.)

  3. GBA Editor
    Martin Holladay | | #3

    John,
    The short answer is that, although expansion and contraction probably puts a strain on the roofing screws, the screws seem able to handle the stress, and the neoprene washers seem to keep these roofs leak-free, even when expansion and contraction forces end up slightly enlarging the fastener holes.

    I'm put on a lot of these roofs, and haven't yet had an example of a leak caused by expansion and contraction forces.

    I've heard of some roofers who prefer to install two overlapping panels -- for example, two 12 foot panels instead of one 22-foot panel -- because of the concerns you raise. That's always an option. I've installed 18-foot panels without problems.

Log in or create an account to post an answer.

Community

Recent Questions and Replies

  • |
  • |
  • |
  • |