GBA Logo horizontal Facebook LinkedIn Email Pinterest Twitter X Instagram YouTube Icon Navigation Search Icon Main Search Icon Video Play Icon Plus Icon Minus Icon Picture icon Hamburger Icon Close Icon Sorted

Community and Q&A

Insulating a sloped open space

ranson | Posted in Green Building Techniques on

How would one place cellulose in a large 2′ tall sloped (4:12) under roof space with a smooth sloped floor and ceiling and no internal framing? Assume that ventilation is taken care of elsewhere. My biggest concern is keeping the insulation where it belongs.

–John

GBA Prime

Join the leading community of building science experts

Become a GBA Prime member and get instant access to the latest developments in green building, research, and reports from the field.

Replies

  1. GBA Editor
    Martin Holladay | | #1

    John,
    You haven't provided a clear description of this space, but here are the relevant principles:

    1. Unless this roof assembly includes an adequately thick layer of rigid foam above the roof sheathing, building codes require that you include a ventilated air space between the underside of the roof sheathing and the top of the cellulose insulation.

    2. If the cellulose is going to be installed in a sloped roof assembly, then you need to encapsulate the area before blowing in the insulation. If these are deep rafters, then you would need to install site-built ventilation baffles to enclose the insulation at the top, and some type of material -- InsulWeb, drywall, or rigid foam -- on the underside of the rafters to enclose the insulation at the bottom.

    Here are links to two relevant articles:

    Site-Built Ventilation Baffles for Roofs

    How to Install Cellulose Insulation

Log in or create an account to post an answer.

Community

Recent Questions and Replies

  • |
  • |
  • |
  • |