GBA Logo horizontal Facebook LinkedIn Email Pinterest Twitter X Instagram YouTube Icon Navigation Search Icon Main Search Icon Video Play Icon Plus Icon Minus Icon Picture icon Hamburger Icon Close Icon Sorted

Community and Q&A

Solutions for rain screen strapping “sucking in” rigid foam?

Kraphtymac | Posted in Green Building Techniques on

During installation of 1X4 strapping (fir) over rigid foam (EPS) with Headlok screws, my builder has been remarking about the Headlok screws tendency to “suck in” and compress the foam.

Anybody have creative solutions for this?

GBA Prime

Join the leading community of building science experts

Become a GBA Prime member and get instant access to the latest developments in green building, research, and reports from the field.

Replies

  1. GBA Editor
    Martin Holladay | | #1

    Thomas,
    As long as the furring strips end up co-planar, a slight amount of compression is not a problem.

    There are two possible approaches:
    1. Learn to stop tightening the screws before compression occurs.
    2. Compress the foam under each furring strip equally.

    Some builders have an instinctive feel for how tight to go. Others don't have that instinct. If your builder is having trouble keeping everything co-planar, he or she should keep a 4-foot level handy. Every now and then, check to make sure that the furring strips are co-planar. If an area got sucked in too far, back off the screws. If one area creates a hump, tighten the screws that will suck in the hump.

  2. charlie_sullivan | | #2

    It may be possible to control this by setting the clutch on the driver for only a little more torque than is needed o get the screw in all the way.

  3. Chaubenee | | #3

    Sometimes you have to use a string too. You can ease them Bach out to reduce the tightness too. Sometimes you have to use shims here and there. Walls without foam are never perfect, either.

Log in or create an account to post an answer.

Community

Recent Questions and Replies

  • |
  • |
  • |
  • |