GBA Logo horizontal Facebook LinkedIn Email Pinterest Twitter Instagram YouTube Icon Navigation Search Icon Main Search Icon Video Play Icon Plus Icon Minus Icon Picture icon Hamburger Icon Close Icon Sorted

Community and Q&A

8-inch cinder-block foundation insulation (1 in. thick) on top of block, under 1×8 plate

mediainformation | Posted in Green Products and Materials on

I need a insulation 1 inch thick by 8 inch wide to put on top of an 8-inch cinder-block for sill insulation between cinder blocks and 1×8 wood plate?

Where can we find this type insulation, that is not rigid like air conditioner duct insulation?

GBA Prime

Join the leading community of building science experts

Become a GBA Prime member and get instant access to the latest developments in green building, research, and reports from the field.

Replies

  1. GBA Editor
    Martin Holladay | | #1

    Freddie,
    Presumably, you have filled the cores of your block with rebar and grout -- right? So the top of the wall has no holes in it -- just cured grout.

    The product that you need to use between the top of your block wall and your pressure-treated sill plate is called sill seal. You can buy it at a lumberyard or building supply store.

    Sill seal made of closed-cell foam is better than sill seal made of fiberglass.

  2. Expert Member
    Dana Dorsett | | #2

    Depending on just how even & smooth the top of the foundation is the sill seal alone may not be very air-tight. Laying a bead of can-foam on the top of the foundation between foamy sill seal and the wood as you go will usually take care of that. Even on poured concrete foundations where the top had been left a bit rough the sill seal isn't always reliable. Works great on even moderately trowel-finished concrete though.

    This video is is a reasonable representative sample of the type of sill seal, being used on a troweled slab foundation:

    https://www.youtube.com/watch?v=VHF74HQPZtM

  3. user-939142 | | #3

    Generally, insulation is not placed on the foundation wall between the sill plate, and it more than likely won't meet code anywhere. With an engineer you could potentially confirm the use of a high psi foam.

    You want to use the sill seal mentioned, but it serves as a break and seal, not insulation.

    Placing a small strip of insulation between doesn't do much if you think about it. If your wall is so temperature different between foundation and wood frame, you need to insulate the foundation wall.

Log in or create an account to post an answer.

Community

Recent Questions and Replies

  • |
  • |
  • |
  • |