GBA Logo horizontal Facebook LinkedIn Email Pinterest Twitter Instagram YouTube Icon Navigation Search Icon Main Search Icon Video Play Icon Plus Icon Minus Icon Picture icon Hamburger Icon Close Icon Sorted
Video

Flashing Windows: Sill Pans with Flexible Peel-and-Stick

This video is only available to GBA prime members


Pan flashing protects against water damage

Pan flashing can be made from plastic sheeting, EPDM membrane, or something more durable, such as lead-coated copper, or even stainless steel. Nearly as important as head and pan flashing is how it’s tied into the wall behind the siding. Leaking water should roll down to the pan, lip over to a drainage plane and out the bottom. Water that leaks into wall cavities causes rot and mold.


MORE VIDEOS IN THIS SERIES


1. Self-Draining Sill Pans

2. Sill Pan Flashing Options

3. Sill Pan with Regular Peel-and-Stick

4. Sill Pan with Flexible Peel-and-Stick

5. Flashing Flanged Window Jambs

6. Flashing Pre-Cased Jambs

7. Head Flashing Windows/Doors

8. Counter-Flashing the Head


RELATED VIDEOS


Air-Sealing Inspection of a Window

Durable Window Installation

A Home Energy Audit

Most Recent Videos

Job Site Visits

Green Home Tours

Get the Most from GBA

Video Transcript:

The first thing I want to show you is the flexible material, because this stuff is very easy to use, so it’s more costly than the straight nonflexible flashing. The first thing I do when I do a sill pan is I precut the material so it wraps up the sides of the jamb somewhere between 4 and 6 inches high. Then I want to remove just part of the release sheet.

Work from the inside, out

Many of the manufacturers have pre-embossed strips along the back, so you don’t have to remove all of the release sheet, just part of it. So I’m going to remove the main part of the back and leave the last strip on the front. I find it’s easiest to work with the flashing tape from the inside of the rough opening rather than the outside, but if you find differently, by all means; it can be done either way.

Even…

0 Comments

Log in or become a member to post a comment.

Related

Community

Recent Questions and Replies

  • |
  • |
  • |
  • |