GBA Logo horizontal Facebook LinkedIn Email Pinterest Twitter X Instagram YouTube Icon Navigation Search Icon Main Search Icon Video Play Icon Plus Icon Minus Icon Picture icon Hamburger Icon Close Icon Sorted

Pretty Good House- Page 2 of 3

  • Question & Answers

    What would you consider to be a “pretty good” window in CZ5?

    I'm currently in the process of comparing window quotes for a new build in Southern Ontario (CZ5). What would folks consider to be "Pretty Good" target performance for this climate zone?…

  • Question & Answers

    ARTIFICIAL INTELLIGENCE & HOUSE DESIGN

    All the current blather about Artificial Intelligence makesone think that a logical place to utilize AI would be to optimizethe ROI for house design - you should be able find…

  • Question & Answers

    Leaving part of a second story unfinished for a Pretty Good House?

    One of the concepts in PGH is to reduce square footage.Another is to keep the volume simple i.e. a box.For a hypothetical PGH, if you need say, 1500 square feet…

  • Question & Answers

    Window debate

    I am getting ready to order my windows for my new build in central maine and am debating between cost and performance.  The two windows I am debating are Mathews…

  • Question & Answers

    Low Slope Roof Detailing for PGH

    This is a new SFR in PNW zone 5B. The primary roof is to be framed flat with 9.5" I-joists, see attached SE. The final roof profile is to be…

  • Question & Answers

    Architect/Design team recs – Lexington KY. Thanks!

    Hi everyone!PGH book recommended this bulletin board for recommendations.  We are planning to build a house on a 15-acre forest-lot in Lexington KY and are looking for recommendations for a…

  • Question & Answers

    Wall Assembly

    Hello - we are in the process of building plans for a new house in New York. I have read quite a bit about wall assembly and trying to optimize…

  • Question & Answers

    Plywood Baffles + Wind Dams

    Hi all,A contractor helping on my PGH renovation (at least I think it's going that direction :) )  made a mockup of a site-built baffle made from plywood today. It's…

  • Question & Answers

    Staircase descent stability significantly better at 13-14″ tread depth, but it takes up more room.

    https://www.greenbuildingadvisor.com/question/what-do-you-love-or-hate-about-your-home?cid=237767&discussion=response#comment-237927 User jberks posted an excellent summary video of research on staircase ergonomics and fall risk. I was interested to see the primary research, and I believe it is here: https://www.sciencedirect.com/science/article/abs/pii/S0003687015300569?via%3DihubEDIT:…

  • Question & Answers

    Rain Screen: Furring, Entangled Mesh, Sill Seal, or no Rain Screen

    Hi all,Some of you have seen my Pretty Good House and Thermal Bridge questions as I'm working towards finalizing a building envelope design for a remodel in the Catskills, NY.Tomorrow,…