Walls- Page 4 of 11
-
Double-Stud Wall: Second-Floor Band Joist
A detail for minimizing moisture migration and air leakage in a high-performance wall with standard band joist
-
Thermal Bridging on a Brick Building
A layer of rigid foam has been left out. What now, and who pays?
-
Residential Post-and-Frame Construction, Part 5: Insulation and Air-Sealing
Thoughts on working with mineral wool board and batt insulation and a smart vapor retarder for an air barrier
-
Is Adding More Insulation Worth It?
A re-siding project is an opportunity to add exterior insulation—if the effort will pay off
-
Double-Stud Wall with Reservoir Cladding
Solving for vapor drive in an assembly destined for a stucco finish
-
Integrating a Service Cavity
Framing methods for ensuring mechanical, electrical, and plumbing systems remain inside the building envelope
-
Insulating Walls Without Sheathing
Installing insulation in an old house without sheathing and detailing the walls so they dry
-
Roof Overhangs and Moisture Problems
Research demonstrates the correlation between roof-overhang depth and wall performance
-
Plywood vs. OSB
An updated review of two of the most common sheathing products
-
Continuous Control Layers for a Cathedral Ceiling
A detail for ensuring water, air, vapor, and thermal management at key transitions between wall and roof